Talk:Enfield SA80

Too bad I will probably never have the chance to handle one of these-S&Wshooter 01:35, 24 July 2009 (UTC)

Ehh... I could live without messing with one. The fact that it is the main battle rifle of the army, but SAS does not use it says a lot to me. I'll follow the highly trained experts who have the choice in what to carry and from what I've mostly read that choice is a M4 variant. Eagleye1022 03:41, 8 December 2009 (UTC)

Seeing as I shoot left-handed, this weapon sounds like it'd be a major pain in the ass for me to shoot. Good thing the U.S. uses M16 & M4-series weapons instead. Orca1 9904 03:45, 8 December 2009 (UTC)

The British forces are trained to use it right-handed. Yes, its a pain, but it's fairly easy to do, and after a while you get used to it. The A2, and now the newer A2-mk2 are very nice and reliable - just as good as the newer M16 and M4s. One of the reasons the Hereford Gun Club doesn't use the SA80 family is because (aside from the orrigional L85's poor reliability) is because no-one else uses it. (Aside from the defence force of Jamaica and one or two other places). If someone sees them using the L85 (or L86) they can easily guess who's popping in for a visist.

I've shot the SA80A2 pretty extensively in field conditions, and never had a jam with it. It's got alot of good features as a soldier (short, easy to clean, very slick sling setup), but as a serious shooter there's alot to dislike. Shitty trigger, hard to reach controls, poor ergonomics in the grips. I wouldn't feel poorly armed carrying one in Afghanistan, but I was much happier with my C7. - Nyles

I found this little bit of information interesting (from a visit to REME's museum and technical museum) - one of the prototypes for the L85 (XL68 I think) was actually left handed. Also, the L86 prototypes had a changable barrel - it was effectivly a bullpup bren-gun - I wonder why these features never made it into production - time saving I suppose. Spanner

Excessive Variants

This page has too many SA80 variants that have not appeared in any films/games/animes, it needs to be cut down. --AdAstra2009 22:50, 12 October 2009 (UTC)

I removed the L98 section and listed their appearance according to each variant.--SB2296 13:22, 13 October 2009 (UTC)

Beta-C Compatibility?

Does anyone know if any of the SA80-series weapons, such as the L86A1 & L86A2 LSW variants, can use Beta-C drum magazines? I know they can handle all STANAG box magazines, but the design of the SA80's magazine well makes me wonder wether it could take the Beta-C or not. Orca1 9904 13:04, 5 December 2009 (UTC)

In theory it should be able to fit and feed from Beta-C mags, but I think the postiton of the Mag-well, given the bullpup configuration of the weapon, would make it impractical to use, given that it would mean the mag would be in the way of your arm when holding the weapon. The Wierd It 14:29, 5 December 2009 (UTC)

Anyone remember the old quad-stacked magazines they used to have for the Suomi M31,(http://world.guns.ru/smg/smg52-e.htm), anyone think that we could bring back that concept? Yeah it wouldn't be the 100 rounds in the Beta-C, but it could potentially make any rifle that can accept STANAG Magazines into a light automatic weapon. W190009637

No, i don´t think so, for a LaW use an Ultimax or FN Minimi.-Markost 15:22, 5 December 2009 (UTC)

Which is what the Birtish Army has done, replaced the L86A2 with the FN Minimi Para (L110A1) in the LSW role, and using the L86A2 in the DMR role with a conventional STANAG Magazine. The Wierd It 16:08, 5 December 2009 (UTC)

I'd pick the Ares Shrike out of the lot myself. Light weight, compact, dual belt and magazine feed, rifleman accuracy... what more could one ask for? If only they could get the damned thing into widespread production, it would have been a shoe-in for the USMC IAR program. Spartan198 21:02, 6 December 2009 (UTC)

It seems to be doing pretty well in its new DRM role, although a newer version of the A2 is being released - foreguard replaced with the new RAS-guard (and grip-pod), and the outrigger along the barrel has been removed. Various new optics have been trialed, the ACOG is a UOR, until the new Spectre Elcan can be brought in.

You couldn't really use a Beta C mag in an SA80, espescially if you were wearing a vest. I don't think it would necessarily get in the way of your arm, and it would fit in the mag well, but it would definately get in the way of your chest. Both in the firing position, and the carry - remember with the SA80 sling (slick set-up by the way, I wish you could mount one on a C7) you carry it across your chest. - Nyles

New title

Is the new title okay?--SB2296 10:56, 3 January 2010 (UTC)

Overhaul.

I'm move several items around this page, as evidently, someone is unable to tell the difference between 1994 and 2008. Soldier Soldier did indeed use the SA80. However, due to the time it was filmed, and the years it was set, it did not use the A2. Infact, because this was several years before 2002 the A2 was not in existance yet. Indeed, some of the problems which resulted with the A2's creation had yet to be found (i.e. poor conditions in sand)

Also, there are one or two blindingly obvious errors, for example, in S.T.A.L.K.E.R, the IL86 is obviously an A1 (inverted for 'coolness'). This is obvious because: a)the cocking handle is round and b)the in-game story details practically state it is the A1...

• Infact, it appears that most of the TV appearances of the A2 are the A1. Bugs/Stealth, Soldier Soldier, Firefly, Situation Critical, Zero Hour and Battlestar Galactica. These are A1 models used in the show, and because of the Pre-2002 release date of the A2 to the UK armed forces. Dr Who and Ultimate Force are the only TV shows which actually have A2s in them!

Enfield Prototypes

Since these are part of the SA80 family - should they be added?

I'm talking about the late 60's and early 70's models - such as the XL64ES (which has made an appearance, in The Professionals) and the XL70E3 (and others) (Fallout 1 and 2). Use 7.62 NATO and 4.95 British. Latter models used the 5.56 after the US orders NATO to follow suit.

Hell, maybe put the EM-2 in?

I won't to anything until anyone suggests it, but at the moment non of the prototypes have a page/place to link to.

Only if they've actually been used in something. Same reason we don't have the L98s on here. The Wierd It 17:08, 23 July 2010 (UTC)

Ah cheers for putting them up. XL70 appeared in a big mod for Fallout 3 (but blue. P90, G3, Desert Eagle and a load of others appeared in it). You might want to put it up, since you've also put Project Reality. But, I'll leave that choice for you.

Quad-Rails Updates

Anyone got a picture of them? --190.176.218.80 01:19, 7 September 2010 (UTC)

after a quick search of the net, it appears most of the ones google has to show are either airsoft replicas with the real thing (STAR & Ares can accept it) or complete airsoft replicas. The BBC had some film of soldiers in Afghanistan talking to the Minister of Defence, Dr Liam Fox (sp?), and one of them handed him the new L86A2 - complete with Elcan Spectre and quad-rails.

Where did they go wrong?

If these bullpup rifles are so bad, then what did the designers do wrong that the Steyr AUG, the FN F2000, and the FAMAS do right (just to keep it all European-designed and chambered in 5.56mm NATO)? Why didn't the British Gov't just buy some of the aforementioned rifles for their troops? By the way, if casing ejection is such a problem for bullpups, how much would it cost to license the forward-ejection system (which is patented) of the FN F2000 for the SA80? --Mazryonh 01:07, 8 September 2010 (UTC)

More than it would cost just to drill everyone to shoot right-handed. The Wierd It 10:19, 8 September 2010 (UTC)

They are not so bad. Having used the A1 and A2, and an M16A4 (I think...A3 or A4) and a(Canadian)M4 in exchange exercises, I would pick an L85 everytime.

The original prototypes that the MoD decided to buy were hand made - and were very reliable - in terms of few jams, few parts broken, etc. The actual production models were mass produced, quickly and cheaply. Cheap mass production will not produce the same level of quality and performance as hand made. "Buy another rifle" ok...well, at the time, only the FAMAS and AUG were avalible on the market. The SA80 project had been running since the mid 1960's, and produced several good prototypes (XL64, XL70E, the LSW, all of them hand made) If you mean why didn't the MoD replace the SA80 in 2000 - think of the costs. New rifles, spare parts, repair kits, training for the armourers, training for the soliders. Considering at the time H&K were British owned, and running out of Nottingham, it was cheaper and easier to simply have the SA80 updated. In the British army you are trained to become right-handed when shooting. No exceptions. Otherwise, firing down range could become...'interesting' with cases being (literally) ejected left, right and centre. Honestly, there is nothing wrong with the SA80 family, apart from the weight (especially with the SUSAT). If I was still in service, I'd take an L85 over other assault rifles any day.

You seem to forget that the SA80 series is very unreliable and fragile, including the "improved" A2 models.

No more so than the M16 series. At least the SA80 wasn't sabotaged by the brass. The Wierd It 22:15, 10 September 2010 (UTC)

@whoever posted before The Weird It - have you ever used them? 'Unreliable' - if you forget to clean or look after your rifle, don't expect it to work. Look after it, like you're taught to at training. Never had a problem with any of the A2s I got asigned, and I used them for four years, and the A1s for 5 years. And fragile? For Christ's sake, most of the rifle is made of steel! The only parts I would call fragile are the plastic pistol grips and foreguards, and that was after some berk ran a landrover over one...

For one, I'm not a big fan of the M16 series ether, the M16 and SA80 both can be very unreliable in actual combat conditions with sand or mud. Secondly, No, I have never used a SA80 because I'm American. Thirdly, I think it's just stupid for a combat weapon needing to be cleaned frequently, I mean come! Keeping a weapon clean in muddy or sandy combat conditions is a Oxymoron. A true combat weapon should not have to be clean to be reliable. Just a question, have you actually used your SA80s in severe combat conditions, with the rain, mud, and sand (Just so I can know, not to be critical or rude). And when you say steel, you mean the cheap stamped-steel the weapon is made out of, I heard it dents very easily and screws up the rifle badly (Interestingly, most AKs are made with stamped-steel too, but of a thicker gauge). I think an assault rifle should be made out of stainless-steel and ultra-tough plastic, that way it will need little to no cleaning at all and it will be extremely durable and reliable. The H&K G36 is the only rifle I know that's fairly close to that, it being made out of anti-corrosive finished steel and tough plastic and it is one of the finest assault rifle systems in the world next to AK series.

Yes, I've used it in 'severe' combat conditions. The A1 had problems - but in the 4 years I used my A2s, I only ever had 3 jams. Yes, cleaning a gun is wasted time, but it has to be done for most firearms. That said - I've chucked my L85 into thick mud for a while and then still been able to fire off a few magazines without problem. The whole "SA80s jam when dirty" and "SA80s are unreliable" stuff was only really true for the A1s. The steel is thin - but not that thin. I have seen dents on L85s - but that was because someone had shot it, when the squaddie carrying it had used it as an improvised flak vest. The L85, whilst dented, was still perfectly functioning. Now, the magazines - the orrigional magazines were made of very thin and awful steel. Those dented very easily, and they did cause problems for the gun - which is why they were replaced. A year or so back I read an article, about what the MoD would replace the SA80 with (in 2025) - the idea was, keep the SA80 design - but rebuild it with the same high-quality polymers and light-wieght, non-corrosive metals used in the G36 (as you mentioned). I liked the idea - but I haven't heard anything since, and quite frankly, haven't bothered looking into it. I agree with you - the G36 is a fine weapon, due to it's materials - but you still have to look after it. If the SA80 was re-designed and rebuilt using the materials of the G36 (or similar), it would be a much better weapon system. I'll agree that the SA80 family has problems - the LSW is useless as an LSW, but is very good as a DMR, the IW is heavy, until recently it was almost impossible to attatch modern 20mm gear to it (I had to screw a strip of RiS to my old foreguard so I could put a foregrip on) - hell, most weapon systems have a downfall or disadvantage - but my point remains. Whilst the SA80 series does indeed have problems - they are fine weapons, and really deserve far more credit than they get. And modern materials could improve the weapon greatly.

Thank you for putting the SA80 in a new light for me. :) So the A1 sucks and the A2 is pretty good, kind of like how the M16 sucks but M16A2/A4 is pretty good. I did not mean you never have to clean the G36 off, but if you get mud or sand in it, you won't have to worry about it. I've seen videos of the G36 (and the HK416) put in to vats of mud and then pulled and fire several mags with out a problem. ;) btw, I still think assault rifles being made out of stainless-steel and plastic is diffidently the way to go. I came up with my own design for a stainless-steel and plastic, 7.62 NATO, 32 round, bull-pup assault rifle. ;)

Yes, a good comparison would probably be the origional M16s and then the updated version (although, we were told right from the start that the SA80 needed cleaning, I suppose it was just to avoid similar problems)

If they had chosen the FN F2000 (which is a fine rifle in its own right, and easier to aim grenades with given its computerized ballistic curve compensator) then the only direction the brass would be going is down, with the added advantage of easier brass recovery for recycling and whatnot. Still, I guess it's commendable that they made the best of a bad situation, although I wish they took it a little easier on the South Paws over there. --Mazryonh 01:22, 11 September 2010 (UTC)

Like I said, one of the original pre-production models was a leftie version. The only reason I assume they didn't make it was cost - considering how many people are right handed, and how many left handed people join the Armed Forces, it probably wasn't cost effective to make two versions of the IW and two versions of the LSW. But, training to use the rifle if you are a leftie isn't that difficult. Just very, very annoying. As for the FN F2000, I'll agree it is a fine weapon from what I've seen (I've never had the pleasure to use one) and the downwards brass was a perfect idea. And it's the British Armed Forces. We usually end up trying to make the best out of shite situations... Spanner

This is a somewhat old article criticizing the SA80 series, but I think I'd like to hear how much of it has been proven false or true by the test of time. [1] --Mazryonh 02:33, 12 September 2010 (UTC)

Ah, that takes me back... An interesting read. One of the main 'design flaws' that 'experts' commented on at the time was the lack of a 7.62 round and how the SA80 was fully automatic. Do you know what squaddies were doing in the Falklands War to get their 7.62 SLRs to fire in full (well, burst)? Sticking match sticks in the chamber. Half the 'experts' complaints against the SA80 are old traditionalists who want the British Army to go back to 'ye olde glory days' of the 'mad minuite' with Lee-Enfields. Note of importance - Taking information from ARRSE, like that article did in places, will not end well. It is a joke version of wikipedia, edited by the squaddies and ex-servicemen of the British Army - it generally takes the mick out of anything and everything. It always point out flaws and then exaggerates them. However - I will accept that the L85 does indeed have a problem shooting round left corners. But - I've never faced problems with fumes, like it mentions some have. However, when 25 men are all shooting their rifles whilst in a small room, I have had problems... And 2002 - it was just after the A2s had some out. The unit involved in this (that reported the faults) was one of the RM groups in Afghanistan - it was pointed out that the reason their A2s weren't working was because they hadn't actually cleaned them. As in, ever. 8 years on, with a rigorous and well taught cleaning system and with better internals, the A2 is functioning well - like I said, I only ever had 3 jams in service. The only problem they have now is weight. As the last line from ARRSE says, "the nice new versions aren't that bad, really. However, johnny squaddie is likely to always miss the nice destructive power that the SLR gave him, and so the whingeing will continue for a long time"

The guys in the Falklands were getting full auto FAL's by using captured Argentinian gun-S&Wshooter 11:01, 4 November 2010 (UTC)

Never seen, heard or read anything suggesting they used any captured rifles - where'd you find that out? I've only ever seen the '3 match trick' used by the British forces in the Falklands campaign, but I suppose some units may have 'borrowed' the Argentinian rifles. That the SA80 comes as standard with full-auto as an option is good in my books. Spanner

Upgraded LSW

Does anyone have any photographs, videos or anything showing the supposed new version of the LSW, using the Daniel Defence rail system, and having the outrigger/bipod system changed? If not I think it should be removed from the article, as I suspect it is pure conjecture.

- It is somewhat extraneous info, but I don't see what it hurts, really. We've had similar 'extra' info posted about movies and shows on their respective pages. StanTheMan 18:50, 9 September 2010 (UTC)

I have no problem with information like this being on here, its just that I am fairly sure in this case it is wrong, as I have heard hide nor hair about this upgrade except on this entry. Even in the rare cases when you see the crow cannon being used these days, it is just the standard A2 version, maybe with an ACOG if you are lucky.

Boom: http://www.thefirearmblog.com/blog/2010/01/03/latest-l85a2-model/ Looks kinda ugly if you ask me --yocapo32 20:18, 9 September 2010 (UTC)

That isn't the LSW, but the regular IW with the current array of mods.--80.177.215.100 20:22, 9 September 2010 (UTC)

The only photo I've ever seen of one with the new rail system is property of the BBC, and was used in an item about the defence budget/cuts in November. As in, it was part of a film. There are photos of the new Elcan update (only on an L85 so far), taken at an arms fair in London, 2009, when the company announced that the MoD intended to have the Elcan Spectres by 20...11 I think. Spanner

Ok, I've found a photo of the current L86, (Pre-Elcan Spectre Optic upgrade) with an ACOG. Still can't find the pic with the Elcan, but this should do. (Since I do not own the photo I'll link you to the forum, 10 post down on page 12) http://forums.bistudio.com/showthread.php?t=87669&page=12 --Spanner

L22A2

Just a small niggle, but contrary to what the article currently says, the current issue SA80 carbine is the L22A2. The confusion comes from the fact that the L22A1 version was made but never widely issued, if at all, and I believe that this version is what is labelled as the L22 prototype in the article. I'm not sure if the original version was designated as the L22A1 at the time or whether this is a backronym, but current official MOD documents refer to the current version as "CARBINE, 5.56, L22A2", and this is backed up by the Light Weapons group at the UK's Defence Academy at Watchfield, who claim to have possibly the last remaining L22A1. Does anyone know something I don't meaning it shouldn't be changed? Commando552 22:16, 3 November 2010 (UTC)

L64 Service?

I could be wrong, but my understanding of the Wikipedia article was that the XL64 actually saw service with the Brits from the 1960s to 1980s. Is this true, or am I just mis-interpreting things?74.192.58.206 05:25, 19 November 2010 (UTC)