 Join our Discord!
|
| If you have been locked out of your account you can request a password reset here. |
Difference between revisions of "Remington-Keene Repeating Rifle"
| Line 7: | Line 7: | ||
== Characteristics == | == Characteristics == | ||
| − | Remington manufactured the rifle from 1880 - 1885 with only around 5,000 rifles produced. | + | Remington manufactured the rifle from 1880 - 1885 with only around 5,000 rifles produced.One of the least known, but quite interesting, rifles of this type is the Remington-Keene U.S. Navy rifle. The rifle was the invention of New Jersey arms designer John W. Keene. Keene had been working on his bolt-action repeating rifle since the early 1870s and eventually received nine separate patents pertaining to the design. The rifle's turning bolt operated in more or less the typical fashion. The action was unlocked by raising the bolt upward, and the empty case was extracted and ejected by pulling the bolt to the rear. As the bolt was almost fully retracted, the "magazine elevator" (as it was called by the inventor) raised a fresh cartridge from the tubular magazine into position in the breech so it could be chambered when the bolt was pushed forward. Manipulation of the bolt also automatically cocked the cocking piece, which was fashioned in the shape of an external hammer. It could be lowered to "half cock" to function as a safety. The "hammer" was one of the more recognizable components of the design and was viewed as a safety feature, as soldiers unfamiliar with repeating bolt-action rifles of the era sometimes had trouble ascertaining if a rifle was cocked. With the Keene rifle's external hammer-shaped cocking piece, one could easily observe its position to determine if the rifle was fully cocked and ready to fire. |
| + | |||
| + | The rifle's tubular magazine was under the barrel and was encased in-and protected by-the stock's fore-end. The location of the magazine required that the cleaning rod be offset to the left side of the fore-end. As with most of the other bolt-action military repeating rifles of the time, the Keene was fitted with a magazine cut-off to permit it to function as a single-shot, with the contents of the magazine held in reserve for "emergency" use. | ||
| + | |||
== Movies == | == Movies == | ||
Revision as of 20:59, 15 June 2010
The Remington-Keene Repeating Rifle can be seen in the following productions:
Under Construction
Characteristics
Remington manufactured the rifle from 1880 - 1885 with only around 5,000 rifles produced.One of the least known, but quite interesting, rifles of this type is the Remington-Keene U.S. Navy rifle. The rifle was the invention of New Jersey arms designer John W. Keene. Keene had been working on his bolt-action repeating rifle since the early 1870s and eventually received nine separate patents pertaining to the design. The rifle's turning bolt operated in more or less the typical fashion. The action was unlocked by raising the bolt upward, and the empty case was extracted and ejected by pulling the bolt to the rear. As the bolt was almost fully retracted, the "magazine elevator" (as it was called by the inventor) raised a fresh cartridge from the tubular magazine into position in the breech so it could be chambered when the bolt was pushed forward. Manipulation of the bolt also automatically cocked the cocking piece, which was fashioned in the shape of an external hammer. It could be lowered to "half cock" to function as a safety. The "hammer" was one of the more recognizable components of the design and was viewed as a safety feature, as soldiers unfamiliar with repeating bolt-action rifles of the era sometimes had trouble ascertaining if a rifle was cocked. With the Keene rifle's external hammer-shaped cocking piece, one could easily observe its position to determine if the rifle was fully cocked and ready to fire.
The rifle's tubular magazine was under the barrel and was encased in-and protected by-the stock's fore-end. The location of the magazine required that the cleaning rod be offset to the left side of the fore-end. As with most of the other bolt-action military repeating rifles of the time, the Keene was fitted with a magazine cut-off to permit it to function as a single-shot, with the contents of the magazine held in reserve for "emergency" use.
Movies
- James Wainwright as Olin Mingo in Joe Kidd
Television
- Brad Johnson as Beau Dorn in Crossfire Trail