Discord-logo.jpg Join our Discord!
If you have been locked out of your account you can request a password reset here.

Talk:Tokarev TT-33

From Internet Movie Firearms Database - Guns in Movies, TV and Video Games
Jump to navigation Jump to search
Is a Tokarev worth buying? I saw one at a gun store in my town a while back and the price was really low-S&Wshooter 05:15, 23 August 2009 (UTC)

It is well worth buying. They are very reliable and accurate. I like the fact that it breaks down similar to a 1911 but the hammer assembly is one piece that makes it easier to clean. I would suggest trying to find one in 9mm or one that includes both the 7.62x25mm and 9mm barrels. The Norinco 213 is the same as a Tokarev but somewhat easier to find one but includes a safety that is actually a good one.96.32.133.162 04:02, 15 December 2009 (UTC)

Too bad I have the rule of NO CHINESE GUNS EVER. I know where to get a 9mm Tokagypt though-S&Wshooter 04:09, 15 December 2009 (UTC)

Even though I don't like Chinese guns, new ones aren't coming so buying one isn't supporting China anymore, Its been paid for so why not?--FIVETWOSEVEN 21:42, 12 August 2010 (UTC)

Yugo Tokarev

The Zastava M57, the Yugoslavian copy of the Tokarev was used in Savior and Rambo II, should we include it here as well?

Yes, it is a type of Tokarev pistol so definitely MoviePropMaster2008 02:31, 15 December 2009 (UTC)

Reason for obsolescence?

I'm confused as to why this pistol and its proprietary 7.62x25mm round was deemed obsolete by the Soviets and replaced by the 9x18mm Makarov round, a cartridge that was arguably obsolete right from the moment it was designed due to the popularity and widespread use of the already-in-use 9x19mm Parabellum round. I've heard that the 7.62x25mm Tokarev round is supposed to possess more velocity and better kinetic energy than most 9x19mm Parabellum loadings, coupled with better kevlar penetration against low-level ballistic armour, so it seems a bit of a mystery to me as to why they would "downgrade" their pistols and SMGs from something that wasn't broken in the first place.

Also, if indeed the hype about the 7.62x25mm round is true, then does that mean the PPSh-41 was the FN P90 of its day, or that the TT-Tokarev was the Five-SeveN pistol of its day?

For the 1st section of this post: I looked up some information about the Makarov round and the Tokarev round. The Makarov round was designed because the Red Army wanted a simple pistol using the Direct Blowback system (the Makarov PM, PMM, etc), and to prevent the chance of ammunition falling into Western Hands and being used against the Red Army in the event of war. (information paraphrased from http://en.wikipedia.org/wiki/9mm_Makarov). Come to think of it, a similar situation occurred with the American-180 Sub machine gun, chambered in the .22LR round, which was designed as a weapon to arm police in the hope that should the weapon ever fall into the wrong hands and be used against police officers with ballistic vests, the officers would not be killed by a police issue weapon, due to the .22 round being a low penetration round. For the 2nd part of this post: I'd think the TT-33 being the Five-seveN of the day would be more appropriate, given the PPSh-41 not being very compact or that accurate after about 75 meters because of the high rate of fire and the not exactly great sights.

I see, the rationale behind the Soviets' adoption of the 9x18mm Makarov cartridge wasn't on wikipedia the last time I checked that particular entry. I'm surprised then that the Russian military (cash-strapped as it is) hasn't gone back to the 7.62x25mm Tokarev round in order to update its pistols and SMGs to armour piercing ammunition again. Rather, they've gone to overpressure variants of the 9x19mm parabellum cartridge to turn their SMGs into PDWs. Maybe the reason why they chose overloaded 9x19mm rounds was that they felt they had to match or exceed the FN P90 in their box or helical magazines? I take it the reason why the Bizon SMG can't use Tokarev rounds in a helical formation is because they're too long to fit in a helical magazine of manageable length, and repeating the PPSh-41's drum magazine format is bound to result in feeding problems.

No, why? It's possible to make helical mag for TT cartridges, but its capacity will be almost a half less. What's the point then? TT rounds are not as good at piercing armor. Russia developed special cartridges - SP10(armor-piercing) and SP-13(armor-piercing incendiary) and weapons chambering them - SR-1(pistol) and SR-2(SMG). You can find info about it on the nets.

I think another reason why the Soviets decided to switch to the Makarov was that they chose the Tokarev initially so they could make use of the German 7.63mm Mauser round for pistol and SMG ammo. So then the Makarov was their attempt at ensuring the same trick could not be pulled on them. A shame that this round went into obsolescence for reasons other than its performance, like the fate the 10x25mm Auto round suffered. Makes me wonder what a modernized version of the PPSh-41 using the Tokarev round might look like today, and if it could actually serve in the "armour-piercing SMG role" well . . .

From what I have heard the performance of the 7.62x25mm Tokarev round is more similar in performance to the .357 SIG than the 5.7x28mm.
The 7.62x25 round actually isn't as good as described here. In deed it has good penetration but overall the whole kevlar-buster myth is caused by AP ammo, and more by steel plated bullet's with lead core. With standard copper plated bullet it has no more penetration than 9x19 and probably even less, due to a lightweight bullet. It causes more problems than has to offer. Its loud and very bright. It has much recoil in my opinion much more than .45 acp (fired from TT pistol). It ricochet's (?) much. It losses energy very fast due to a instability in flight - bullet shot at 100m from ppsh-41 can be catch by gloved hand. With only minor bruises. (ok, what glove you want??? ypour joking right? at 100yrds my Yugo Tok goes thru a lvl II vest and the 12-14" diamiter oak tree that was "wearing" it. No glave will save you... )Stopping power is low - bullet go trough flesh without spinning and leaves very narrow and clean canal.
All this from my own experiences with few guns in this caliber witch can still be found in my country as a service weapon in some security agency's due to a low cost and quite easy maintenance needed.
And one more thing - the Russians adopted this cartridge with c/96 - it was just the round they already have in production. They only added a little power to it. And that's all--Ripp 15:53, 10 March 2010 (UTC)
Ok, if it's all from your own experience.. You catched bullets with your hands? Or was shooting human flesh that is advancing on you? Shot the walls?
I was eyewitness of this. One guy was shooting, the other one was in line of fire about 100m away and one meter to right (crazy...) and catching bullets like a "fast bee's". "Hard but not impossible". He showed me 3 cached bullets and tree not so big bruises on his hand. He has some thick working gloves on his hands when he did that. Maybe it was the old gun, maybe bad ammo. I think that bullet started to spin shortly after leaving the barrel, and loose much of it's initial energy. (Man sorry for the bad English i wasn't using it for few years.)--Ripp 22:10, 10 March 2010 (UTC)
Yeah, probably fucked-up 60 years-old barrel that spits bullets like a camel and (maybe) underloaded cartridges. And in what country bullshit-fest like that happened?
Happy land of vodka and twins. The barrel could be worn out, ammo was standard military FMJ - fresh can. Curious thing: never used polish ppsh41 (manufactured 1956 - we have thousands of them still in factory grease) shots 80mm groups at 25m. This can rise many questions. But that was only curiosity - including it or not I still think that 7.62x25 is bad as self defense ammo, and only average as military ammo.PS. Didn't Fairbarn or Applegate made similar thing with Thompson SMG? I've heard only some rumors. --Ripp 23:53, 10 March 2010 (UTC)
Hmm, Ripp's experience with sounds very odd. Your "bullet catching experience" sounds like it came from an old barrel. Maybe you should get try shooting those fresh rounds in a newer barrel and see what happens. Still, the penetration sounds like something that could be made use of in a more modern PDW with the barrel length to make better use of the powder that gets wasted as blast and muzzle flash. I hear the OTs-14 Groza has a 7.62x39mm variant, and I think something like that could be converted to use old stocks of 7.62 Tokarev ammo (the barrel's already the right size, but the firing mechanism needs to be converted). --Mazryonh 00:54, 11 April 2010 (UTC)


can the new Russian 9mm 7N31 +P+ armor-piercing round be fired our of any 9mm hand gun or only The PP-2000? also how effective are Teflon coated bullet on Ballistic vest? Rex095

As far as I know the new Russian round can only be fired from pistols built for it. As for the Teflon coated "cop killer" bullets.... that is a complete myth created by a script writer to scare people.-Ranger01 05:28, 13 August 2010 (UTC)

Ripoff of the Colt Hammerless?

The Tokarev has always looked to me like a cheap copy of the Colt Model 1908 Hammerless. Has Colt ever tried to sue them (I know it's long past time now for it) in the past? Harleyguy 07:35 16 February 2010

It looks more like a Colt 1903. And there IS a hammer. And I don't think Communists ever really cared about our bourgeois copyrights to begin with. --Funkychinaman 21:23, 16 February 2010 (UTC)

Actually the TT pistol only looks alike 1903 Colt - there are some major differences. Striking mechanism are Tokarev patent and the locking is from C.1911. Another thing is that in the time it was constructed CCCP actually cared about international patents. (PS can someone tell me if im doing editing right? )--Ripp 15:54, 10 March 2010 (UTC)

Norinco Type 213A

I have seen a lot of the single column Type 213s but have never seen one of the 14 shot type 213A models. Has anyone ever seen one of the double column 9mm versions of this gun? -Anonymous


Do Not Sell My Personal Information